Twin Conductor Underfloor Heating Mats
Click to enlarge
Twin Conductor Heating Mat designed for under Tiles, Stone, Marble or similar type floor finishes. The mat is 150 watts per m and can be used as primary or comfort heating *.The system is 100% waterproof and is the ideal solution for creating a warm floor in Bathrooms, Wet rooms, Kitchens & Conservatories. The fibreglass mesh can be easily cut and shaped to fit awkward shaped areas**.
There is an option of a Digital Thermostat or a Manual Thermostat(see additional images)***.
It is always recommend having an insulated subfloor to improve efficiency and would advise using the Thermal Boards in conjunction with the Mat system.
Always buy a mat smaller than the area to be heated as the cable cannot be shortened.
All electrical connections must be carried out by a qualified electrician.
230-240V. Cable Type: Teflon with FTP. Max Floor Temp 40C. 150 Watts per m. RCD required. One sided connection. Fixings not included. Insulation Required.
Heating Mat, Flexible Conduit Pipe, Instructions.
*A Heat loss calculation is advised to determine whether the system can be used as a primary heat source.
**Please note that you cannot cut the heating cable.
Supplied with floor sensor which must be installed in the floor and mounted in conduit.
Fully programmable digital clock supplied with floor sensor which must be installed in the floor and mounted in conduit.
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: